| |
14th Fab Managers Forum
Date: 18-19 October, Messe Dresden
Room: tbd
Matching FAB Managers Critical Operations
and Strategic Issues with the Suppliers
Short-term and Long-term Service Strategies
|
…
|
Sponsored by:
 ___ 
|
About the Fab Managers Forum
The continued active support of FAB managers has been instrumental for the development of topical FMF themes and very successfully pulls the FAB, R&D and Suppliers community together. This made the FMF a well recognized platform for business partners to meet for an efficient exchange on key developments, needed for semiconductor manufacturing to succeed in Europe.
Based on the many good FAB team's inputs, the underlying theme continues to be “How to keep current FABs fit for purpose and most efficiently running”. The supporting FAB managers community like the forum sessions to be highly interactive, to develop towards a good matchmaking of USER NEEDS and SUPPLIER SOLUTIONS FAB challenges/critical issues raised:, on the one side, and, available and planned suppliers solutions/H/W, S/W and Services:, on the other side.
FAB managers will provide aggregated inputs from their and their peer's teams, on 'what the issues and opportunities are'. Invited are leaders from the OEM and special services community, to share their answers, how to take on these critical challenges and close gaps, assuring matching services in the short run and over the strategic horizon.
Conference Agenda
Monday 18 October, Afternoon
Tuesday 19 October
08:00-08:25
|
Registration and Welcome Coffee
|
08:30-08:40
|
Welcome
Heinz Kundert, President, SEMI Europe
|
08:40-09:40
|
Session 1 Cost-efficient long-term Equipment-Services
Maintenance and Critical Parts Supply, Used Equipment Refurbishment & Tool Adaption, H/W and S/W Upgrades
Session Chair: Peter Schaeffler, Manufacturing Manager, Freising,
Texas Instruments
|
08:40-09:00
|
“Increase the Lifecycle of Equipments with the right
Maintenance Strategy”
Andreas Lehner, Director Manufacturing Engineering, Lfoundry
|
|
09:00-09:20
|
"The Management of Services - An Attempt to Gain Effectiveness of
Maintenance Contracts"
Joachim Kühn, Team Leader Equipment Engineering, X-Fab
|
09:20-09:35
|
"Service Strategies for Extended Use and Re-purposing of Equipment"
Eyal Shekel , Vice President Service, Tokyo Electron
|
09:35-09:40
|
Aggregation of key questions/panel
|
09:40-11:00
|
Session 2 FAB Automation & Control
Advanced Process / Tool & Logistics Control, AMHS, Lean Manufacturing and X-sigma Quality Management
Session Chairs: Riccardo Martorelli, FAB Mgr, Avvezano, Micron and Francis Taroni, COO, Altis Semiconductors (TBC)
|
09:40-10:00
|
“Automated Precision Manufacturing (APM) Adaptation for the
GLOBALFOUNDRIES Fab Network”
Peter Goerigk, Sr. Manager, Factory Control Solutions, Global Manufacturing Systems Technology, GLOBALFOUNDRIES
|
10:00-10:20
|
“Evolution: From Living on Trees to Upright Walk”
"Sensibly adding AMHS into selected FAB sections of a mature Mfg Line" Thomas Leitermann, VP Operations, Dresden, Infineon
|
10:20-10:40
|
"Stepping up Lean Manufacturing Controls in a Production Ramp-Up
(Title TBC)
Thorsten Widmer, Director 200mm Line Project, Bosch
|
10:40-10:45
|
Questions with the speakers
|
10:45-11:10
|
Coffee Break
|
11:10-12:20
|
Session 3 Line Capability Optimization & Introduction of Advanced
Technologies
Advancing Legacy Manufacturing Sites; Wafer Size Conversion for Capacity and/or Technology (ITRS); 150>200mm; 200>300mm ('how to tweak or to leap-frog current limitations')
Session Chair: Giorgio de Santi, R&D Pilot Line Director, Numonyx
|
11:10-11:30
|
"Extending Life Time of 8” Fab in Europe "
Philippe Campion, Operation Manager Deputy, Rousset FAB,
STMicroelectronics
|
11:30-11:45
|
"A Comprehensive Approach for Holistic SC Line Optimization in Legacy FABs"
(Title TBC)
Sanjiv Mittal, Managing Director, Global Services, Applied Materials
|
11:45-11:50
|
Questions with the speakers
|
11:50-12:35
|
Closing Panel: FAB Efficiency & Strategic Line Advancements
Panel Chairs: Giorgio de Santi, Director R&D, Numonyx and
Philippe Brun, Site & Operation Manager Rousset Site, STMicroelectronics
- Jerry Sowers, VP, Customer Satisfaction, Novellus
- Martin McCallum, Technology Manager Europe, Nikon
- Alois Brandner, CTO AGS, Applied Materials
- Mario von Podewils, Manager Operations, X-Fab
|
12:35-12:45
|
Closing Remarks
Panel Chairman
|
12:45-13:30
|
Lunch Buffet
|
Who should attend?
European FAB management, related executives, and professionals from the semiconductor industry.
Price Information
(19% VAT not included)
|
Until October 1
|
After October 1
|
Onsite
|
__
|
SEMI Members
|
€ 225
|
€ 275
|
€ 325
|
Non-Members
|
€ 275
|
€ 325
|
€ 325
|
|
|
